Friday, 30 June 2017

STAMPED LEAVES AND GRASSES CARD

OFFSET STAMPING
Hmmm.....must have been leaning to the side when I made this one!  Anyway, I'm sure you can see how its supposed to be, and make a far better version yourself!

There are a couple of stamping techniques you might want to try (or use again) worth mentioning.  The first is using a small to medium sized stamp to create a backing paper.  I used a leaf stamp with black ink to mirror the stamping in this case, but you can use Versamark if you want a more subtle effect, or mix and match colours if you prefer brighter!

The main image has been stamped twice - once with green and once, slightly offset with black.  If I was re-doing the card I would search out a more olive green, as the lime doesn't quite go with the backing paper, I'd probably use dark grey instead of black and I'd be positioning the stamps a little closer together.
Anyway, as I said, hopefully this effort will inspire you to seek out some stamps and have a go yourself and make a better card!  If you do, I'd love to see it!

I have, of course, used Regal products throughout.


Friday, 23 June 2017

IRREGULAR SINGLE FOLD CARD

THANKYOU CARD
Cards don't have to be rectangular, in fact why not have some fun, as has been done in this example and experiment with some different cuts.  As long as you remember to leave enough on the fold to keep the front and back attached, and a big enough base to support the card, the possibilities are endless!.

The maker has combined some pretty backing papers with elements from a Sparklelight 3D sheet.  She has added a peel-off greeting and some ribbon trim.  This is a fun card for someone special.

(Can you tell from the vague references to "the maker" that I'm not sure who actually produced this masterpiece.  Marilyn says "not her" , I know "not me" so apologies to Janet, Tania or Sharon for the lack of credit).

Friday, 16 June 2017

PATTERNED (DOUBLE) STAMPING WITH DIECUT FOAM

DOUBLE STAMPING
There is space underneath the main motif to add whatever greeting you want to this card - birthday. best wishes, "just a note" etc.  but the main point of it, as far as the blog goes, is to illustrate a couple of useful stamping techniques.

The large shape was cut from a foam sheet (which you can buy from Regal craft cards) using a nesting die and secured to an acrylic block with a little bit of double sided tape so that it could be used as a stamp.

You can just stamp in the ordinary way, in which case the result is a solid image of the diecut, but in this instance, for the bottom layer, the flower was inked up, and then an uninked (Darkroom Door) background stamp was pressed onto it. Instead of stamping the leaf pattern, it removed the pink ink from the diecut, which was then stamped onto the white background circle - patterned stamping!

The image of the inked diecut remains on the background stamp, so if you work quickly you can stamp a "negative" patterned image too!

I've made it sound a lot more complicated than it is.  You can use any solid stamp coupled with a relatively densely patterned one.  This technique appears under many different headings - often Kiss-stamping if you want to search for more info.

The base card is one of Regal Craft Cards newer cards -  Stonewash (PL27), which despite its name is a very on-trend shade of grey.

Friday, 9 June 2017

COLOURED CHALKBOARD EFFECT WITH STAMPS

WHITE STAMPING WITH PENCILS
I've used a blue cardbase from Regal Craft Cards, nesting dies and a stamp from Kaiser to make this card which illustrates a simple technique you might like to try next time you want to stamp on a dark background.

Select a fairly solid stamp, and stamp the image using white ink.  When the ink has dried (if you want to be sure, just whizz over it with a craft heat gun for a few seconds), colour on top with coloured pencils.

As you can see - super simple, but quite effective.  You end up with a gentle chalk-boardy effect.

I deliberately haven't added a greeting as you could use this card for many occasions.

Friday, 2 June 2017

BIRTHDAY/FATHER'S DAY CARD

BIRTHDAY CARD 
We are always being asked for card ideas that are suitable for men's birthdays and so Tania has used her dies and some papers from one of Kaiser's little pads to make this example.

There's no reason not to add a little bit of bling, though, and some well-placed green rhinestones add life and lift the neutral brown tones of the papers.

If you are already thinking about Father's Day cards, it would be a simple matter to replace the birthday greeting with a "Happy Father's Day" and keep the rest of the design.

Friday, 26 May 2017

STAMPING WITH VERSAMARK AND EYESHADOW

This isn't quite a 5 minute card but it won't take you very long to make.

Start with Regal's Wisteria card with a large oval aperture (LO16), and add a little thank you sticker to the bottom.

Stamp some flowers (I used Darkroom Door stamps) with Versamark ink.  Whilst the ink is still damp, rub on some chalks (true confessions - I used eyeshadows) to add colour.

Fussy cut around the edge of the largest flower (or as appropriate if you have positioned yours differently and slide over the edge of the oval when you secure the stamped paper in the card.  Stick the third panel closed and that's it.  Couldn't be easier!!

Friday, 19 May 2017

AUSTRALIANA BIRTHDAY CARD

AUSTRALIAN THEMED Z FOLD BIRTHDAY CARD
Roma has made this amazing Z fold card by adding folds and an extra panel to a single fold base card.

She has used a selection of carefully matted plain and patterned papers and various die cut and clip art shapes as decoration.

The difference between a good card and a great card is often in the detail and if you look at how carefully Roma has positioned her borders and how nicely she has coloured the die-cut animals, you can see why this falls into the latter category.

Friday, 12 May 2017

SPARKLELIGHT CELEBRATION CARDS

CELEBRATION CARDS
Sometimes we just want to say "well done" be it for passing exams or a driving test or just achieving something of note.

Lois has used a Sparklelight 3D sheet to make these bright and cheerful cards to send a message of congratulation.

The pack (Regal code - SLDK48634 contains two sheets.  One has greetings and two pictures to build up (more if you use the parts carefullly), the other has two different backing sheets, borders, corners and extra pictures.

Add in some Regal singlefold cards and you'll have enough cards to say "well done!" for quite a while!

Friday, 5 May 2017

CARDS USING STENCILS AND DISTRESS INKS

STENCILLED BUTTERFLY CARD
Stencils are all the go at the moment.  There are lots of different designs available at Regal right now and so many different ways to use them.

Lee has made the butterfly card at the top, using a distress ink background, with flicked water features and added a die cut greeting.

I've done something very similar for the feather card, only I've stamped on a more sparsely coloured distress ink background using a misted acrylic stamping block, before stencilling on the spots.

The third card has used the same stencil through the Cuttlebug (any similar machine will work), using a rubber mat to emboss the light card.  (I cut the circle in the middle out first).  I then just lightly rubbed some ink over the top to emphasize the texture.

All three cards feature die cuts.  The big butterfly is layered for a 3d effect.  Lee had added a glitter tape border to the edge of her panel, and I've inked mine to make it stand out a little more from the background.
TWO MORE EXAMPLES OF STENCILLED BACKGROUNDS

Friday, 28 April 2017

SPOOL CARD WITH RIBBON

SPOOL CARD FRONT
People are often under the impression that shaped cards are really difficult, and some of them are - not this one though!

All I've done is take a standard  Regal single fold card, and covered the middle of the front with some striped paper and the top and bottom with tan Bazzill.  The next step (with the card closed) is to pencil in some straight lines the same distance in from either side.  I've then used that ever useful papercrafting tool, a 20c piece to round the edges.  The actual measurements don't matter too much, you're only aiming at a cotton reely kind of shape with enough card still attached at the fold to hold it all together and a space big enough in the middle to hold the ribbon or trim you want to include.  Just make sure its symmetrical.

If you do your cutting (still with the card folded). just inside the pencil lines, you won't even have to rub them out.  You can add an optional hole in the middle at the top if you want to.

The next step depends on whether or not you want to include a small gift.  If not, and you used sideways stripy paper in the middle of the front, you're more or less done.  If you'd like to give some ribbons, laces or other trims to a crafty friend (or someone little who likes ribbons in their hair), secure one end at the base, and then carefully wrap the trim around the front of the card.  Secure with a pearl-headed pin (you might want to add a little dab of glue to the end if the sharp end might be a problem.  I've added a little spool tag.

Decorate the inside too if you want.
SPOOL CARD INSIDE

Friday, 21 April 2017

3d BUTTERFLY CARD

3D STAMPED BUTTERFLY
I like to think that this card looks better in reality than on screen, however, its more the technique, I wanted to show.

If you'd like to add a bit of dimension to your card you use the same method as I have shown here, which is.........

Stamp an image (from Kaiser) three times  - once onto the card front and the other two onto medium weight paper.
The image on the card is the background.  Decide which parts you want to use as the middle - (I've used the wings but not the body) and the front (Just the top two wings in this case.

Colour all the pieces (I've used Copics - you don't have to shade!), gently shape the cut out pieces so that they have a soft curve, and assemble them on top of each other, using foam dots to add height.  That's it - I hope I haven't made it sound harder than it is.

I've added a stamped greeting, also attached with foam dots, and edged the card (a single fold from Regal of course) and greeting with a little sepia ink.

Thursday, 13 April 2017

PAPER ROSES STAMP BON VOYAGE CARD

BON VOYAGE
Sometimes "less is more" and this card has a very simple colour scheme - just blue and white.  The sailor boy stamp is one of the lovely new cling rubber stamps made by Paper Roses, and the "Bon Voyage" is from a Kaiser set.  I've used Versafine ink so that all the tiny textured detail on the jacket etc comes out clearly.

I've subtitled this my "Nervous Stampers Card" because each of the elements is done separately and then assembled.  The boy is stamped onto smooth white card and then placed in a textured white rectangle cut out card from Regal Craft Cards. The greeting has been stamped onto smooth card, fussy cut and attached to the front with foam tape to raise it slightly off the surface.  There is an insert fixed inside with double sided tape that has an additional greeting.  In other words you don't have to commit anything to the overall card until you're happy with the result....................Not that this should be a problem as I have found that all the Paper Roses stamps I have used have stamped a perfect image first time!

For everyone who is enjoying a break over the next few days, may it be happy and fun, and for those of you still working, thankyou - obviously you are doing something very worthwhile and your efforts are appreciated!  Best Wishes to all.

Friday, 7 April 2017

COFFEE MUG CARD

5 MINUTE CHAI CARD
This is a genuine 5 minute card.  Grab a tea bag (the sort that come in the larger packets like Twinings), a pre-cut coffee mug card (XNO46) from Regal craft cards and some paper to stick over the peripheral bits of the mug.  Stick it all together and cover the messy bits by securing the third panel over the top and off you go!

You can obviously add a lot more embellishment than I have used, and if you want to make the card more decorative than functional, you can always take the tea bag out of the packaging first, and enjoy it yourself.

This would make a nice "getting in touch" card for someone you can't actually meet for a cuppa, and/or you could have some fun choosing the appropriate type of tea to send.  This one is both "spicy" and "soothing"...no further comment.


Friday, 31 March 2017

BIRTHDAY CARD AND POST-IT HOLDER

CARD WITH MATCHING POST-IT HOLDER
Sometimes its nice to give a little gift with a card.  This example comes from one of the demos I did last year.  The card part is super simple - I've just used a pretty piece of Graphic45 paper and added a die-cut oval with coloured peel-off greeting, as the wording on the paper in the middle of the frame didn't suit the occasion.  The base is a textured ivory single fold frim Regal.

I can't give you precise instructions for the post-it folder as I just placed the post-its on a scrap piece of card and drew roughly around it, adding a flap on either side of the base and at the bottom, then neatened it up and checked that it all fitted together before using it as a template on my "nice" card.  I'm sure more formal templates for something similar are available on-line.

More G45 paper has been used to decorate the top flap, as well as a fabric flower and some little pearls.  Acutually I've just noticed that one is missing from the top rh edge already, which tends to suggest that using them for something that may well be tossed around in your handbag might not be a good idea.  Perhaps liquid pearls or similar would be better.

Probably the thing most noteable, is the closure mechanism which is just two pieces of sticky-backed magnet sheet (available from Regal).  Its easy to cut with scissors, you don't need glue, and it provides a surprisingly firm closure.  There's enough room at the top of the post-its to add a little pencil (save time looking for the right size by just sawing a big one to size).  You might want to tie it on just to make sure it doesn't go its own way.

With a different greeting this set would do for Mother's day or Secret Santa as well as birthdays.

FRIDAY UPDATE

It was lovely to see so many smiling faces at the free demo last week - some new and some familiar!  I hope everyone who came left with some useful ideas.  The next big date on the calendar for Regal Craft Cards is their giant sale on June 23rd.  I'll give you more details about that closer to the time.

The new Kaiser range will be available - there are two collections which include papers, dies, pads, collectables etc.  One is a pinkish vintage - "High Tea" and the other (which is my favourite) "Indigo Skies" is my favourit e colour combo - navy blue and white!  There are some other new dies in the shop - pop by and have a look!

Friday, 17 March 2017

COOKING THEMED BIRTHDAY CARD

HAPPY BIRTHDAY FOR COOKS
Cooking is a popular pastime at the moment for all sorts of age groups and both men and women, so I've tried to think of a card that would be broadly suitable for anyone.

The colour choice is about a neutral as it gets - black, white and silver (TIP - if you're having a bad colour day choose b&w plus one colour or a metallic and you can't go wrong).

I've rummaged around my ever-expanding box of Kaiser dies and cut out squares, ovals, cooking utensils and the greeting and then just assembled it on a silver background and stuck it to a white Regal single fold card.  If you don't have all the dies, you can always substitute stickers or stamps for the greeting, and fussy cut pictures or stamped images for the utensils (or other cooking related items).  The silver I have used is mirror board and consequently, is very shiny (not so evident in the photo).

If you like to theme your cards around gifts, cookbooks, aprons, actual utensils, and exotic ingredients are obvious accompaniments.

FRIDAY UPDATE

Lots of lovely new things in at Regal.  There will be a rare chance to buy anything in the shop at a twenty per cent discount on Monday 20th (that's next Monday for those of you reading this today so don't miss out if there's something you've been thinking about adding to your craft supplies.)

There will be a demo on that day too.  It will run continuously between 10 and 3 so even although I'll be showing lots of different things you can just come and go as you please.  Attendance from 5 minutes to 5 hours welcome!  As I think I mentioned before, the theme of the demo is stamping and I will be showing both basic and advanced techniques so that if you don't use stamps often (or at all) or if you've been stamping forever, then there should be something to suit you.  I've certainly rediscovered some techniques from days gone that are well worth reviving, as well as some new things I hadn't tried before.  I'm taking a pretty practical approach - the "artsy" bits will be for you to decide.  I'll look forward to seeing some of you there on the day.

Friday, 10 March 2017

ANOTHER WAY TO USE A LATTICE CARD

BEE HAPPY - ANOTHER WAY TO USE A LATTICE CARD
This is not exactly how Regal's lattice cards are "supposed" to be used but it works just the same.

Fold out one panel, attach plain or decorative paper underneath the cut out section, and secure the whole panel to the base.  Add a button wherever you like (I've gone for the middle which is the safest option).  Fold the other panel and add decoration (I've used a giant bee from a Tim Holtz cut and emboss set), and you have an easel card.

It's probably worth mentioning that the bee was cut from Antique Gold shimmer card, which has a yellow core, so after sanding it lightly, the embossing showed up very effectively and there was an interesting mix of shine and matte.  I didn't have a greeting of the right dimensions at hand so I mixed and matched some black alphas with half a broken birthday sticker (!) for the greeting.

Just by the by, the card folds down flat and will still fit in the standard envelope supplied with the cards.

FRIDAY UPDATE

Just a quick reminder about Regal's stamping demo and discount day on Monday March 20th.  That's just over a week away - see last week's update for details.

Friday, 3 March 2017

CUTTLEBUG REFERENCE CARD

CUTTLEBUG REFERENCE CARD
This is an idea for an inexpensive gift for a crafty friend.  The card features a series of papers and tags embossed with different patterns.

 The "gift" is a collection of tags on an album ring.  The idea is for them to use their embossing folders to emboss about 3/4 of each tag, and then write the name/manufacturer etc at the top, so that when they are looking for just the right folder, sample patterns will be close at hand.

Because the tags are relatively small (but not too tiny) they are a handy size for handbags so that if the owner is shopping for new folders its easy to check whether or not they already have the same/similar patterns.  If you want to upsize your gift throw in a couple of embossing folders!

Clearly you could go to town and decorate the front tag a lot more thoroughly that I have, as all I did was add a few peel off letter stickers.  Why not make one for yourself as well!  All the materials are from Regal Craft Cards.

FRIDAY UPDATE

I'm back at work after some holidays.  Regal has so many new things to see - there are lovely butterfly and lace dies from Ultimate Crafts, the March Kaiser release, 3D sheets and a variety of interesting stamping products from Hero Arts - and that's just what I can see from where I'm standing.  If, like me, you haven't been in for a while, I'd strongly recomend a visit

I'm doing a stamping demo on March 20th (which is a Monday) in the hall behind the Baptist Church in Wellington Street (Launceston).  It runs between 10 and 3 and you can just come and go during that time as you want.  I'll be doing a basic technique followed by a more advanced version so hopefully it will suit a variety of skill levels.  I was inspired by two main things - one is the number of people who say "I just can't get on with stamping", two are the other people who say "I've got lots of stamps but I just don't seem to use them very much."  I'm in the latter category - and am pleased to say that in the course of preparing for this demo I've fallen in love with stamping all over again!

(PS There's a discount day in the shop on the 20th as well so mark it on your calendar now!).
(PPS That reminds me.......the little calendars for 2018...yes it's not a typo are now available at Regal.)

Friday, 24 February 2017

LATTICE CARD

This is another one of those nice cards that come pre-cut from Regal so you can get right on with the fun bit.

Sharon as put some decorative paper (a fine pattern, as the one she has used is probably best) under the lattice panels, and added silver stickers onto the "bars".  Denim blue pearls in two sizes complete the card.

The card itself is made from thick textured white cardstock, and you can imagine how easy it would be to add special white papers and pearls for a wedding, or pastels for a baby or red rhinestones and gold paper for Christmas etc etc - there are so many possibilities

Friday, 17 February 2017

PAPER PIECED STAMPED CARD

I'm doing a stamping demo for Regal on March 20th, so I probably should leave this card until then but I couldn't wait to play with my lovely set of Darkroom Door stamps.

I've kept the colours very simple, but stamped the hammer and saw with black ink onto both grey and yellow paper, the tape measure just onto yellow, and the other things just onto grey.  I'v then cut out the handles of the saw and hammer from the yellow and stuck them onto the grey, before fussy cutting around the whole lot.  I've added a little bit of detail with a silver pen, and assembled the lot on embossed card stuck to a black Regal base.

I didn't have a suitable stamp at hand, so I added a peel off sticker as a greeting - I'm fairly sure the stamp would have looked a lot better in this context.

Friday, 10 February 2017

FLORAL SWING CARD

FLORAL SWING CARD
The good thing about this card (apart from the fact that Janet has made another gorgeous floral card) is that the swing base comes in a packet from Regal Craft cards, already cut and folded, so that you can go straight to the fun bit of decorating it!

Just add pretty papers, a pre-made paper flower, a greeting (coloured to match) and some trims tied around the thin part of one panel. Ink around the edges and your done!

It's not a quick card to make as there is a fair bit of cutting and sticking, but its not difficult.  For some of us, choosing the colours and combinations is the best bit of card making, and if you use this style as a base there are lots of surfaces to decorate!  (Don't forget there is the reverse of the card as well).  This would be an obvious choice for Mother's day or a special birthday.

Friday, 3 February 2017

TORN LAYER CARD

TORN LAYER CARD
Another card from Sharon's buttons demo this week.

The two buttons attached to the left side of the card feature old vehicles and match in perfectly not only with the vintage theme, but also with the round shape of the clocks and penny farthing wheels.

Patterned papers are usually printed on a white base core, and Sharon has used this effectively to add a distinctive edge to the torn paper layers.  If you're a bit under-confident about tearing, rip the paper towards you, using the side of your l.h (if you're right handed) thumb as a guide, to make sure you keep vaguely on-track, without ending up with a totally straight edge, as you would if you, for example tore against a ruler.

You can see how this can be a great technique for using up all those little scraps of paper you can't bear to throw out.  (Yes, OK....when I say you, I really mean me!!).  Plus, its once again an easy design to adapt for many different occasions