VINTAGE POSTCARD PYRAMAGE

PYRAMAGE USING VINTAGE POSTCARDS

Regal craft cards have lots of vintage postcards, and photoslot card bases too, so this takes a lot of the work out of making these cards.  Both examples use sets of nesting dies. 

Choose the focus of your cutting - in this example the baby's face, and the man and two children, and make sure that the smallest die (placed cutting side down) frames this area nicely.  Position the rest of the dies evenly around the smallest.  You can use as many dies as you like (and will fit) but three is about right for this size of postcard.

Use removable tape (or magnet) to keep the dies in place and run though your cutting machine with whatever stack you usually use for die-cutting.  Carefully remove the pieces.

Replace the pieces, using double sided foam tape or silicone glue to add increasing or decreasing height. The baby shows the pieces stacked up so that the face is the highest point, so the first (larges) die-cut went in with one piece of foam tape, the next was stuck in using two, and the third using three.  The man and children, was stacked the opposite way so that the design was inverted with the people in the centre at the lowest point, and the border dies getting progressively highter, so that you end up looking into the picture. 

Its hard to see the three dimensional characteristics of these cards from the picture, but have a play, you'll be pleased with the results, which are always quite effective (with not nearly as much work involves as there appears to be!)

POSTCARD SWING CARD

OPEN SWING CARD

SWING CARD FRONT

Regal make these lovely swing cards already cut, folded and ready to decorate, as well as the stickers, papers and even the postcard, so if you are looking for a quick to make card which has great impact, gather your supplies and have fun!

PHOTOSLOT CHRISTMAS CARD

Postcard Christmas Card

Sharon has combined a few elements to make this super-quick Christmas card.

First take a postcard (this one is available from Regal, as is the base card), slot it into a photoslot card.  Add (optional) decoration and off you go!

Regal's photo slot cards are designed to take a 6" x 4" (15cm by 10cm) photograph so if you have something special that you want to share it's still not too late to get some printed and posted for Christmas.

It's the ideal "handmade" card when you don't have time to make a handmade card!

OVERLAPPING CENTRE FOLD CARD USING POSTCARD IMAGES

OVERLAPPING CENTRE FOLD CARD

Here's another idea using postcards available at Regal Craft Cards - this one featuring vintage jam labels.

Just construct a centre fold card.  This one has been made especially to fit the images. If you want to adapt the technique for other sizes its easy to make a centre fold card by removing half a panel on either side of a three panelled card).

After you've made your card base, cover it with whatever background paper you like (if you want to).  I've just used a plain dark blue for this example.

If you haven't made your card to fit the images you're using, then cut the images to fit the card - you'll need three, just large enough to cover the height of the card, allowing for a couple of millimetres in between.  Its not a bad idea to back the panels as they are probably a bit more likely to get bent than on a normal card.  In this case, I've just used the same white cardboard used for the base, leaving a little border all around.  This works doubly for this card as it covers the text on the back of the postcard.

Centre all three panels over the fold and tape the top and bottom ones to one side and the middle panel to the other and its done!  I've made it sound much more complicated that it actually is.  Its an effective and easy card form.

ANOTHER CARD FEATURING A POSTCARD - SUITABLE FOR FATHER'S DAY

CHEERFUL SAILOR CARD

This cheerful card was made by Marilyn using a postcard available from Regal Craft, placed on a white single fold card, decorated with patterned paper.

She has trimmed the picture, and matted it on a dark blue border, and added a similarly matted sticker (once again from Regal).

Marilyn has embellished the card with an anchor charn "tied" with twine to the greeting, and added a couple of split pins to finish.

Father's Day might be on Sunday, but you'll still have time to finish this card if you start right now!  Otherwise its a good one to have in the cupboard as its suitable for both sexes and all sorts of occasions!

3D PICTURE USING POSTCARDS

CARD FRONT

INSIDE THE CARD

Here's another card suitable for anyone really but probably timely with Fathers day just around the corner.  (You have no idea how long that paragraph took to complete as in the US, the apostrophe goes between the r and s, whereas in the UK it goes after the s, and in Tasmania I'm just confused.
I wimped out and didn't add one at all so put it where you want!)

Anyway, back to the card - Regal has a spectacular range of vintage postcards.  I've used one as the base and cut and shaped (just using my fingers and the palm of my hand) elements from another couple to stick on top with foam tape.

The 3d effect is much more pronounced in reality that it appears on screen - the bottle is nicely rounded, and the flag does look a bit fluttery.  This post is turning into a bit of a repository of random information, but just in case you are thinking "but the flag should be blue"............The red ensign was in use from 1901 to 1954 and was the civil flag i.e.blue was for government and red was used if you wanted to fly an Australian flag in your backyard.  Needless to say everyone got very confused and the red flag is now only used at sea.

Getting back to the card (again) I've made a simple pop up machanism for inside, and used a Regal photo slot card as an easy way to mount the postcard on the front.