OVERLAPPING CENTRE FOLD CARD USING POSTCARD IMAGES

OVERLAPPING CENTRE FOLD CARD

Here's another idea using postcards available at Regal Craft Cards - this one featuring vintage jam labels.

Just construct a centre fold card.  This one has been made especially to fit the images. If you want to adapt the technique for other sizes its easy to make a centre fold card by removing half a panel on either side of a three panelled card).

After you've made your card base, cover it with whatever background paper you like (if you want to).  I've just used a plain dark blue for this example.

If you haven't made your card to fit the images you're using, then cut the images to fit the card - you'll need three, just large enough to cover the height of the card, allowing for a couple of millimetres in between.  Its not a bad idea to back the panels as they are probably a bit more likely to get bent than on a normal card.  In this case, I've just used the same white cardboard used for the base, leaving a little border all around.  This works doubly for this card as it covers the text on the back of the postcard.

Centre all three panels over the fold and tape the top and bottom ones to one side and the middle panel to the other and its done!  I've made it sound much more complicated that it actually is.  Its an effective and easy card form.