Friday, 25 January 2019

FLOWER POT CARD

FLOWERPOT 
Here's a quick card using the Flowerpot base card from Regal Craft Cards (XFLP1), and a postcard (It's a picture from the botanical gardens).

Just cut a window in the front panel of the card - it doesn't have to be a circle, secure the postcard to the back panel, add a couple of stickers for definition and as a greeting and a small embellishment - in this case a glitter butterfly and you're done.  How easy is that?!

For a special personalised touch, why not take a photo from your own garden to use as a feature.


Friday, 18 January 2019

SIDE-STEPPER BABY CARD

SIDE-STEP BABY CARD
Sharon has used decorative papers, fussy cut elements, lace and stickers to make this sweet baby card.

The base is a side stepper card from Regal Craft Cards (ST1) which provides a great starting point to decorate for any occasion.
FRIDAY UPDATE


Hi everybody, Marilyn here, I'm back!!. Not quite fully recovered from a new knee op, but getting there.  I thought to myself I will get my Christmas cards done while I'm recovering, so I hobbled to my craft room to get my stash of cards I had previously made, only to find the pile very much diminished. So the first week was spent putting together  3D's to make into cards  so that I had enough to send out. Oh well it took my mind off sore knees. I'm  a big fan of 3D's so lucky Regal Craft have a lovely big range now. I like dies too and the range Regal has is substantial and there is quite a few Australiana ones which are really cool!

Friday, 11 January 2019

ALL-PURPOSE SIMPLE SQUARES CARD

SIMPLE SQUARES
How super simple is this card.  If you have hole punches it may be time to get them out of the cupboard and put them to good use.

Select four different paper (a great way to use up your scraps), and cut four large squares (punch them, die-cut or just use scissors!).  If you have a corner rounder punch, round off opposite corners.  If you don't then you can buy yourself one at Regal /Craft Cards or use a coin as a template and cut with scissors..

Cut out a square in another colour that is big enough to fit all four square with a bit of space between and around them, and stick the smaller squares in place, with the non-rounded corners in the corners of the backing square (see photo).  Mount the whole thing onto a square singlefold card from Regal Craft Cards

You can just stop there if you like, but if you want to add further detail you can either add an embellishment to the middle of the shapes or to one or all of the smaller squares.  In this example I've punched out two circles, added some holes and threaded some stranded embroidery cotton through.  You could use a button as an alternative.

One of the great things about this card design is how versatile it is - you can vary the colours, or emboss each square with a different pattern or paint them etc, and couple this with embellishments appropriate to literally any occasion from weddings to birthday, to Christmas.  A little tip though - unless you use a really "loud" embellishment, the paper is the star of this card, so don't skimp on quality.

Friday, 4 January 2019

POSTCARD GREETING CARD

It's sometimes hard to find traditional pictures to go onto "men's cards" but one source is postcards! 

Regal sell a range of Tasmanian postcards that feature scenery, fishing, trains etc as well as historic advertising that are perfect to add to your cards.

The first step in this card is to cut a large oval from thin blue card stuck to adhesive double sided Jac paper .

Peel of the backing and stick it to the front of the card.  Using removable tape, secure a smaller oval die in the middle of the blue one, and, with the card open, cut through all the layers on the front i.e. make a hole with a frame.

 The next step is to use this hole as a guide to stick some red paper/card to the inside panel.  Again, using removable tape, position a smaller oval die in the most appropriate place on a postcard.(Tassie people will probably recognise this picture of the West Coast Wilderness Railway).  Cut out your picture and stick it onto the red oval.  You can mount it on foam tape if you want for added dimension.

Friday, 28 December 2018

CALENDAR - ANGLED EASEL CARD2018

2018 CALENDAR EASEL CARD
Hello, I hope the Christmas season is treating you well.  This is a sort of weird post for me, as I'm doing it in advance because of the holidays, but I am now an officially "retired" person so its sort of a ghost post if you like!

Sharon has done some clever folding to display this little calendar from Regal Craft Cards.  It sits up nicely with the nested flowers holding it in place, but will fold flat for posting.  Regal sell these little calendars (CAP1), some slightly bigger (CAP2), larger pads to fit A4 pages (CAP3) and single page A$ calendars with slots to add a photo or 10 x 15 cm artwork.

It's a nice little gift for a friend, or to make for yourself.

Friday, 21 December 2018

NESTING TRIANGLE CHRISTMAS TREE

NESTING TRIANGLE CHRISTMAS TREE
Here's another Christmas Card that is fortunately quicker than it looks to make and, as there are only a few days left  (unless you're one of those super-organised people who are already onto next year's cards) that's a good thing.

I took this close-up photograph of my Christmas tree last year (HINT - if you want some really individual "paper" for next year it's worth taking a few minutes to do this).  If you don't (and I expect that's most of you) have a photo at hand, decorative paper stuck to card is fine.

Choose an appropriate nesting die - I've used a triangle to suggest a tree, but you might have something else that would be OK (such as circles to make a bauble).  Nest all the dies inside each other and cut using a single pass with a die-cutting machine so that you have lots of parts.  Use double sided-tape, sticky fixers or silicone glue to put the layers back together at increasing heights, so that the largest is close to the page and the smallest is highest.  (You could do it the other way around and "look into" the stack).  I've embellished with stickers and pearlS, and cut a couple of little trees to fit behind.

Anyway, I've made it sound way more complicated that it is.  Its best that you take 10 minutes and have a little play with some scrap paper - hopefully all will become clear!

Thursday, 20 December 2018

FOUR PRETTY FLORAL CARDS

We had a visit from one of Regal's Queensland customers last week and she brought some of her cards (using Regal Craft Cards) as the bases, to show us.  It's always lovely to see what people do with the things they buy.

Sandra very kindly allowed me to take a photograph of her cards so that I could share them with you.

Friday, 14 December 2018

Z FOLD CHRISTMAS CARD

Z FOLD CHRISTMAS CARD
Here is another example of the z fold card (the "right" way up this time).

Tania has covered each panel with decorative paper, leaving a small border around each, and added detail with die-cuts, stickers and pearls.  I won't go through each bit as you can see for yourself what she has done, although it is worth noting the Christmas baubles on the middle panel.

A triangle with scalloped edged backing has been added to the front and this draws attention to the greeting, as well as the fold of the card. The use of non-traditional colours is also worth noting.  Christmas cards don't HAVE to be green, red, white and gold!
THE OPENED CARD

Friday, 7 December 2018

Z FOLD CHRISTMAS TREE CARD

INVERTED Z FOLD CARD
Regal sells these Z-fold cards in red, white and ivory as well as forest green.  Not every one wants a super-quick card, and although these could be a speedy project, there are lots of panels to decorate if you prefer to take your time.

Marilyn has had a really good idea, and literally turned the card upside down.  By adding the thick-cut gold tree (available from Regal) to the smallest panel, the card is well-balanced and won't fall over easily when it's sat up for display.

Marilyn has used pieces from a Sparklelight 3D for embellishment (you could make your own presents with dies or just rectangles of card or decorative paper and bows), as well as stickers and tartan ribbon.

The thing I like most about this card (apart from the fact that I always appreciate alternatives to the "right way") is how nicely it sits with the presents displayed both in front, and behind the tree for a great 3d effect.
EACH PANEL

Monday, 3 December 2018

FRIDAY/MONDAY UPDATE

Hi, tis I, Marilyn reporting for duty again.
This will be the last time for a while as I go in to have a knee fixer upper on Wednesday so will be out of action for a bit. While I was away last week Janet has put out the card of the month on display. I am always amazed how 4 or five people can see the same card and come up with 4 or 5 totally different ideas. There are some gorgeous ones to check out.
Don't forget we still have heaps of el cheep a reno dies to pour through as well as the fabulous Paper Rose selection. This would make a  great Christmas Gift I know I would be happy to receive.

Friday, 30 November 2018

CHURCH WINDOW CARD

CHRISTMAS CUT OUT CARD
How's this for a quick Christmas card idea.  Regal make a wide variety of three panel cut out cars.  This one is XNO14 - church window, but there are Christmas trees, bells, holly, and lots of other novelty shapes in addition to more usual shapes such as rectangles, ovals and hearts.  Have a look on their website for the full range.

Although you can use these cards in a variey of  ways for iris folding, stitching, photos and more, this card illustrates a simple example that you can make quite quickly using decorative paper inside the aperture, a cut out shape on top (the gold bell is available pre-cut from Regal but you could diecut something yourself) and a sticker or, as in this case, a "lef-over" from a 3D picture.  As an alternative to the latter you might want to consider an alternative die-cut, flowers,a bow or some pre-made embellishments.

Monday, 26 November 2018

FRIDAY/MONDAY UPDATE



As you may have noticed this is Monday and not Friday I didn't forget I was just away. This is Marilyn reporting to duty. Heather is once again away on holidays so I'm stepping into the breach.
The card above is either done by Sharon or Tania not sure which and neither are here. This card is made from ruly truly corks and give a quirky look for your cards. There are 2 other examples in the shop to see.  Somebody brought some into the shop so there are heaps here for free.
There are lots of fabulous new dies from Paper Rose in the shop and I have had to give in and buy one. I got the kookaburra on a branch and I intend to put a red hat on it for Christmas.
There are lots of lovely ones to choose from.
Not  sure if you are aware but Heather is retiring come Christmas so maybe you would like to pop in and wish her goodbye.

Friday, 23 November 2018

CENTRE STEP CHRISTMAS CARDS

CENTRE STEP CARD - EXAMPLE 1
These cards look quite complicated but fortunately aren't as difficult as they look because almost all the components are available aready cut.

The red stepper cards are from Regal Craft Cards (STE5).  (They are also available in white).  The silver tree is also from there, as are the clear Christmas Greetings, which in the first example, has been stuck onto acetate, and in the second onto silver card, so they "pop" off the card.  The photos really don't do justice to the three dimensional nature of these cards.

I was away when these cards were made, but I know that Marilyn made the example with the tree so I'm guessing the first example, featuring the deer and tree die (Paper Rose) is her work too?
(I'll let you know if I'm wront.)


CENTRE STEP CARD - EXAMPLE 2

Friday, 16 November 2018

Quick update to today's update.....PS3 (white textured photoslot cards in 50s) are back in stock at Regal too!  Yay!!!!

CHRISTMAS CARDS WITH SPARKLELIGHT STICKERS

CHRISTMAS CARDS WITH SPARKLELIGHT STICKERS
When time is of the essence, stickers are a really handy addition to your cards.  You can, of course, just put them on the front of a single fold card and use them "as is", but if you have a little extra time you can give your cards a special individualised look.

Marilyn has made these two Christmas cards which illustrate how, with the addition of a few papers, stickers and ribbon, you can make cards that have a little more craftwork in them but no so much that you wouldn't still have time to make several before Christmas arrives!

A good range of Sparklelight stickers and lots of different coloured base cards are all available from Regal Craft Cards.

Friday, 9 November 2018

CHRISTMAS CARDS

JUPITER SHIMMER CHRISTMAS CARDS
If you haven't already made your Christmas cards, here are a couple of pretty examples (made by Tania) for inspiration.

The limited edition Jupiter Red base cards are available from Regal Craft Cards.  The embossing folder and papers are by Kaiser, but you could substitute them for any other papers that  co ordinated with red shimmer card.

Use the dies that are already in your stash for further embellishment, or treat yourself and come into Regal for some new craft supplies!

Friday, 2 November 2018

GUMLEAF STEPPER CARD

3D GUMLEAF STEPPER CARD
Sometimes you don't want to give a formal gift, but would like to give more than just a card.

For those occasions why not whip up a calendar and card in one.  All the ingredients for this example are available from Regal Craft Cards.

You'll need:
CAP 1 a small calendar padX
STE1 a pack of side stepper cards
HA109  Gumleaves stacker sheet
A small piece of decorative paper, foam dots and some adhesive (I use doublesided tape).

You can call into Regal's shop on Wellington Street, Launceston or find them on-line.

Friday, 26 October 2018

Z FOLD OVERLAPPING CARD

SITTING OPEN
TOP VIEW SHOWING FOLD

FOLDED FLAT























This is a very simple variation of Regal's three panel card, which is easier to show in pictures than to try and explain in brief......but as we have the pictures I'll give it my best shot!

Fold each of the side panels in turn over the middle panel, adding an additional fold, half way so that the edge of the panel lines up with the original fold (i.e. the edge of the card). The card edges (see the small picture at t he top) will look like they have a Z shaped fold, and the overall card will appear as a gatefold card.  Add any background papers at this stage.

Next, using a set of nesting dies (any will do, but I've used stitched circleds cut a shape that does not overhang the sides of the card (I've done this out of gloss red).  Using removable tape, centre a smaller die in the middle of the shape and run it through your die cutter so that there is a hole in the middle. Stick this shape half over the edge of the left hand folded panel of your card

Using the same die (or a smaller one) cut another shape.  I've used black gloss this time.  You could use the circle you've just cut out if you want although I think a contrast looks nice.  With your card folded shut, centre the smaller shape so that it sits inside the first shape, and stick it down.  It will be approximately half on and half off the folded edge of the right hand side.

Add whatever decorations take your fancy at this stage.

This card looks fine folded flat (see small picture above), and is easy to post like this, but it sits really nicely with a great three-dimensional effect (see large picture).  It could easily be adapted for any occasion.

Friday, 19 October 2018

A SIMPLE SYMPATHY CARD

A simple sympathy card idea - ink around the edges of nesting dies in various shades of grey (or whatever colour you chose), blending as you go.  Add a die-cut circle, birds and greeting, cut the panel to 10cm x 15cm, and slip it into a photoslot card.

If you prefer to use brighter colours, you could also condsider replacing the birds with butterflies.

Friday, 12 October 2018

STITCHES CARDS - part two

........and here are two more examples of the Stitches cards from Regal Craft Cards!  (See last week's post)

Friday, 5 October 2018

TWO DIFFERENT "STITCHES" CARDS

STITCHED CARDS FROM REGAL CRAFT CARDS
I probably don't need to write too much about how to make these cards because a close look at the photos will tell you how they have been made.

Janet (top card) has collected  a variety of themed items to make a baby card, whilst Maz has fussy cut and shaped some patterned paper for her thankyou card.

Both have used Regal's "Desert Haze Stitches card" (XTH2) as a base.  I think I've probably mentioned before how versatile these cards are.  You can achieve a very effective result  in quite a short time as well as using up a lot of those little bits and pieces kept "just in case."

This is also a great card to make with young crafters or beginners as a great result is almost guaranteed.

Chose a theme and have fun!

Friday, 28 September 2018

SPIRELLII GREETING CARD

SPIRELLI CARD
It's probably obvious that this card makes use of scalloped circle nesting dies.  (You can  experiment with different shapes and scallops).

I've taped the end of  some thin metallic thread to the back of the circle and threaded it between the scallops to another gap, a few spaces away, and then just continued to thread all around the circle until each has been filled.  The closer the first distance the bigger the hole in the middle will be.  This technique is known as Spirelli.

I've  used Kaiser paper for the back (unthreaded) circle, border and greeting, and inked some white gloss cards with a variety of pinks for the light and dark circles.  The smalled one has a heard die-cut from the middle and is mounted on foam tape to add depth. 

You have almost certainly guessed that the base card is from Regal Craft Cards.  If you want to make a more "masculine" version, why not go for cogs instead of scalloped circles and change the colours.

Friday, 21 September 2018

STITCHED CARD

Regal Craft Cards make these nifty "stitched" cards already printed so that you can get straight to the fun part and decorate them.

Tania has selected black and gold as the dominant colour theme, which matches very well with the flax base card. and has put her nesting dies to good use to add the decoration.

These cards are a great way to use up all those little pieces of paper that you just can't bear to throw away, and can be modified to suit the interests of the receiptient of the card.  Someone who enjoyed sewing for instance could have a card with pins, needles, fabric scraps, buttons etc.  Someone who enjoyed woodwork might enjoy nails, washers, die-cut tools etc.

Why not buy a pack and have some fun!

Friday, 14 September 2018

SUSPENDED DIE-CUT CARD TO SUIT ANY OCCASION

DIE-CUT BUTTERFLIES
This will take you a little bit longer than five minutes - but not much.  It's more the technique than the card (which I found in Regal's Bargain Corner) I wanted to show this week.

 Just pick a singlefold card, cover the inside right-hand panel with paper (I used plain lime green but you could use patterned paper). 

Die-cut a hole or two in whatever shape takes your fancy .  (At risk of stating the obvious, I chose two sizes of circle).

Now choose dies, that just fit over the edges of the cut apertures, so that there is enough to glue to the front of the card, but so that most of the die is over the hole,  Cut them out, fix in space. 

The finished card has a lovely 3D effect when it is opened or displayed in this way.  I used butterflies but you could equally well use tools (hammer, saw etc) or flowers, or words or anything really, as long as they fit with the holes that you cut.  As a result, you could make a card like this for any occasion!