Friday, 31 July 2015

A NEW WAY TO FOLD AN APERTURE CARD

OPEN REVERSE OVAL CARD

CLOSED CARD
This week I've put up a couple of pictures of a way to use an oval aperture card, that's a little different to the norm.

The folding is easy - just add an extra fold to the middle of each of the outer panels, and fold them back in a zigzag .  The "front" of the card becomes the back and the folded side panels are now the front.!

I've used a 3D Sparklelight sheet (Regal Craft Cards have a good variety available) but instead of building all the pieces onto the base picture, I've put the base behind the oval aperture, and distributed the other pieces over the two front panels.

I've added an embossed red panel to the back of the card (you can't see it in the picture) and secured some red organza ribbon underneath so it can wrap around and securely close the card.  I've also added embossed red card to the inner halves of the folded front panels.

If you've got some half-forgotten aperture cards hiding in a drawer at home, why not get them out and play.  If not, you can always buy some from Regal Craft Cards.

Friday, 24 July 2015

SPARKLELIGHT WATERFALL CARD

SPARKLELIGHT WATERFALL CARD
 This is a waterfall card I made, using a die-cut Sparklelight sheet and a Sparklelight base card - both products available from Regal Craft Cards.
Waterfall cards are made of panels that flip over when you pull the end tab, and are far easier to make that they look.

The instructions come in the pack, but I modified them a bit, by mounting the pictures on some black lightweight card to add extra stability, and also by positioning the "waterfall" run across the card, rather than the more usual vertical orientation.  If I was making the card again, I would put the pull on the other side, as we're all so used to the way that book pages open, this doesn't quite look quite right, even although there is clearly no absolute right and wrong.

Other than that, I haven't really had to add much more other than a bit of "bling trim" (from Green Tara via Regal).

This would make a nice engagement card, but would do for all sorts of occasions.

Friday, 17 July 2015

AN ELEGANT CARD FOR SPECIAL OCCASIONS

ELEGANT SPECIAL OCCASION CARD
This lovely layered card could be used for all sorts of occasions, but engagements and weddings spring immediately to mind.

Marilyn has used a collection of layered materials to decorate the front of the card, creating a variety of textures and patterns which are tied together by the use of the black, white and silver colour scheme.

Working left to right there is printed organza ribbon, cotton mesh, black satin adhesive leaves, specialty paper, white organza ribbon with silver glitter hearts, and a congratulations peel-off sticker, coloured black.  Two paper flowers with rhinestones added to the centre have been added as a final finishing touch.
(All materials including the smooth square base card came from Regal Craft Cards).

Friday, 10 July 2015

SCALLOP EDGED HANDBAG CARD

SCALLOP EDGE HANDBAG CARD
Marilyn has found a quick way to make a handbag card.

She has covered one of Regal Craft Card's scallop edged cards with patterned paper, added a wooden button, and used a necklace chain as a handle.

If you make one of these cards, you could leave it so that you can open it out to a 2 1/2 panel card (This would be great if you wanted to have extra decoration inside, or had a lot to say, or wanted to use the form as an invitation.)

Another alternative would be to add strips of double-sided tape to the inside edge of the striped panel so that the top of the card opens to reveal a pocket - perfect for small presents such as paper flowers, pearls or gift cards.

Wednesday, 8 July 2015

UPDATE

A Wednesday update, just for a change!!  I thought I'd let folks who have been asking (and of course, those who haven't as well) that whilst we won't be at the Craft Fair in Launceston this weekend, Regal Craft will be open as usual on Saturday, and of course, Monday, and we'll have some extra special bargains for those who drop in to say hello.

Friday, 3 July 2015

SWEET FEMININE CARD

FLORAL NECKLINE DL CARD
Sharon has made this sweet feminine card on a Regal Craft Cards DL card base.

She has combined a pretty floral paper with gathered lace, pearl trim and an organza ribbon bow to make a simple but very effective card.

You could adapt this idea as, for example, a suit and tie for a man, or a clown frill and pom poms for a child.

FRIDAY UPDATE

Hello again.  Well stocktaking is finished in the shop...and new things are already arriving.  This week we have new Fabscraps paper  which is really different -  there are three different botanicals in blue, white and black, black and white sewing themes and a lovely rustic country/cooking set (sunflowers. pomegranates etc).  All the Kaiser products from the July release have are out in the shop too.  You can see them all on their website.  There are three interesting paper releases (including a super cute set for little people), and stamps with pictures (I do like words but its great to have something to colour).  Believe it or not, next month will see the start of the Christmas releases!!

Regal's next demo is with Trudy Meijer.  She'll be using a lot of the cards that Regal manufacture, particularly their newest release stepper and swing cards and showing some great ways in which they can be decorated.  The demo is on Monday August 3rd, and I'll post some more details closer to the time.

Friday, 26 June 2015

CENTRE STEP BIRTHDAY CARD

Sharon made this cute card using Regal's centre step card as a base.  (They also make a side stepper card).  You can, of course measure, cut and fold your own cards, but its so much easier to buy a pack pre-cut and scored (with envelopes to fit) and proceed straight to the fun bit!

Sharon has covered the card with a paper from Kaiser (note how she's made the best of it being two sided at the front), and embellished with wooden buttons, split pins and gold peel-off stickers.  This would make a lovely card for a young girl - either to give or for her to make for her friends.

Friday, 19 June 2015

A MULITFOLD CARD FROM SINGLEFOLD CARD

MULTIFOLD LAYERED CARD
 If you like to add a lot of decoration to your cards, here is a simple variation of a single fold card that might appeal.

SIDE VIEW
The back panel is scored and folded in half, the front panel is scored into two small sections of the same size at the end of the panel, and two slightly larger sections each measuring half the width of the remaining front section.  I've probably made it sound harder than it is, as the aim is simply to get three folds of ascending size from back to front.

 I've used a sewing theme for my embellishments which include stamped and fussy cut images, real buttons and stamped paperclay.  Because I have added a fair bit of weight to the front of the card, it tends to want to flatten out, and fall over.  To stop this happening I've threaded some twine through a button at the front and tied it behind.  This adds to the overall design theme, but if you had a more delicate theme you could use gold metallic thread, or make slotted pieces of the cardboard to the sides.

As usual, I have used a card from Regal Craft as the base - in this case, an ivory single fold.

Friday, 12 June 2015

BUTTERFLY ANNIVERSARY CARD

BUTTERFLY ANNIVERSARY CARD
The photo doesn't really do justice to this card, which is much prettier, and certainly a great deal shinier in "real life".

The leaf border and greeting have been sewn on using part of a pickpoint pattern.  Embossed lines have added subtle detail (I used a score board for a nice deep impression).  The butterflies are from a die-cut Sparklelight sheet, I've raised the wings of the bottom one to add dimension.  Six little rhinestones in two groups of three finish the card.

The base is a plain black singe fold from Regal Craft Cards, which is also where the other "ingredients" were sourced.
I've added a purple insert to pick up the colour of the rhinestones, thread and lower butterfly.

Friday, 5 June 2015

THE NEW SWING CARD FROM REGAL CRAFT CARDS

SWING CARD FROM REGAL CRAFT CARDS
 Here is a picture of one of Regal Craft Cards new swing cards, which are available in packs of ten or fifty.

The card is pre-cut and scored so you can get to the best bit (decorating) straight away!  I've used some specialty paper from Christina Re as well as plain (Kaiser Ballerina) embossed with a Kaiser folder.  Numbers and backing were also die-cut and the card was finished with some adhesive pearls and some lace from Green Tara.  A peel-off sticker features on the back of the panel, which swings around when you pull the sides of the card apart.

Its a super card, but surprisingly effective!!

Friday, 29 May 2015

MAKE A BOX CARD FROM A SQUARE CARD

Here's an easy way to make a folding box card using a pre-existing square single fold card.

Cut a double-sided tape width of card of the front of your card, measure and score down the corresponding edge of the card back.

Measure the width of the back after the edge has been cut off, and score a line half way.  Do the same between the fold and the scored edge of the front (the four panels you've created should all be the same size).

Decide how big you'd like your flaps to be.
Cut down along the folds to this length and score along the edge you'll be folding down.  (You can fold all four down, or leave the one at the back sitting up.  Cut across to the edge of the back panel from the last cut so that you are left with a tab.  Score Put some doublesided tape on this tab and stick the panels into a box shape.  Make two or three little rectangles to fit the inside of the box, bend the edges into tabs and secure with the flat side facing the front.

Now all that remains to be done is to go wild with the decoration........in this case a Sparklelight 3d sheet from Regal Craft Cards, spread over the card, with elements attached to little "sticks" made of acetate so they appear to be floating above the main part of the card

Friday, 22 May 2015

FOLDED EASEL CARD

FOLDED EASEL CARD

SIDE VIEW
Although you can buy pre-made easel cards from Regal (they call them tilt cards), you can also make your own from their 3-panel cards.

If you want to do this, then cut off one panel, and crease and fold the back panel in half.  Add double sided tape to the front of the fold, and stick the cut-off panel onto it (the tape will go half way up the panel).  Its probably easier to add your decoration and embellishment before you stick the panels together.  There needs to be some sort of raised shape or panel at the end of the inner back (which becomes the base) so that the panel will sit up.

I've used some stamps from Darkroom door, and as they make quite a statement on their own, I've kept the colour scheme very basic - just dark green Versafine on granite card.  I've cut out a couple of the leaves and mounted them on top of the base image using foam dots to add a little more height, to echo the two leaves on the base which are also stuck on with foam tape to make the "stopper" for the front panel.  I've added a few embossed lines using my scoreboard and a line sticker, that I've coloured in with a green alcohol marker to match.


Friday, 15 May 2015

3D SKATEBOARDER STEPPER CARD

STEPPER CARD WITH SKATEBOARDER
Regal has two pre-made stepper cards, and both of them can be decorated in so many ways!

Marilyn has used the newer centre step card to make this cool card which would particularly suit pre-teen boys -  a group for which cards can be a bit of a challenge.

The skateboarder is from a Sparklelight 3D sheet, the paper decoration and signs were fussy cut from Kaiser paper and the card has been finished with a Happy Birthday sticker.

Friday, 8 May 2015

GATEFOLD PENCIL CARD

PENCIL CARD
Here's a different way to use Regal's new DL gatefold card.

Add a little paper to the front two panels and cut the tops to points, to make pencils!!  I didn't use templates, just stuck the paper on "extra large" and trimmed it back to fit.  I randomly cut one edge of the the main colour to look as if the pencil had been sharpened, and used a 10c piece to get a rounded bottom on the tip.

The pencil paper on the back panel is by Kaiser and I've onlycut around the very top of the pencils before sticking it on.  The band is made from the other side of the same paper (including the bottom margin).  The "buckle" is a gold circle cut with a nesting die, with a smaller circle (still using the same sheet of decorative paper) within.

This would be a fun card to give to a child with a little packet of real colouring pencils inside, and perhaps a sketch book or colouring book , or even a pack of blank cards and a Bright Ideas Pack as a present!  Older children could make the card themselves.

Friday, 1 May 2015

MOTHER'S DAY CARD

MOTHER'S DAY WALLET/CARD
This is Janet's "take" on Regal's new DL gatefold card.

The pretty pastel papers and flowers add a feminine touch to the natural "Buffalo" base card.

She's coloured outline stickers with a permanent marker for a matching greeting, and added a rhinestone flourish and spiralled wire for accents.

With mother's day just around the corner, I imagine there are quite a lot of mums out there who would just love a card like this, especially if there was a Regal Craft Cards gift voucher inside.


Friday, 24 April 2015

EMBOSS WITH YOUR SCOREBOARD

SCOREBOARD EMBOSSED CARD
You might have to look extra hard to see the detail on this card (or click on the image to enlarge it), but hopefully you'll take my word that it is a simple, elegant white on white embossed card.

The base card is a PL1 textured white simglefold card from Regal Craft Cards. I've used my scoreboard to add two lines to make a frame to a piece of backing card.  A third panel, which has also been decorated with variously spaced and angled lines created with a scoreboard, was then mounted on the top with foam tape underneath to a little height.

The decoration is subtle but much more visible in reality.  Embossing is usually clearer on light coloured card, as there is a more pronounced contrast between light and shade.

You might have noticed that I've just added three little rhinestones to the bottom left side of the backing card, which draws attention to the pattern, and the card as a whole.

If you have some small pieces of card and a scoreboard, spend some time playing with lined embossing - it will never replicate a highly decorative embossing folder but it can go into corners where folders can't reach and you can create patterns that are truly individual.

Friday, 17 April 2015

HIBISCUS STEPPER CARD

HIBISCUS STEPPER CARD
Red and black aren't traditional tropical colours but they work together beautifully in this card that Marilyn has made using Regal's new white centre stepper card as a base.

She has fussy cut hibiscus flowers from a piece of patterned Kaiser paper, and coated them with dimensional magic to create a high gloss raised finished.  The front of the card has been covered in black and the green (red's comPlementary colour) of the leaves and the covering of the back panel, gives a sense of extra dimension.

Marilyn has extended the red, black and white scheme to her greeting which she has made using a peel-off sticker on a tag, tied to the side panel of the card.  All in all, this appears to be a very dimensional card - but one which folds nice and flat for posting!!

Friday, 10 April 2015

A SIMPLE POCKET CARD

BASKET CARD
This card is a lot simpler than it looks.  Just start with a square card (Regal Craft Cards sell a good selection), and fold the sides of the front panel in to the middle (the card fold sits at the top).

Secure the edges together - I've stuck a piece of embossed card on the top, but you could punch a couple of holes and tie the edges together with a ribbon.  This gives you a pocket, which can be "visually" filled - I've used a Sparklelight 3D sheet from Regal and spread the elements out rather than stacking them in a more straightforward way, but you could fill the pocket with small lollies or perhaps a packet of rhinestones or ribbons for a crafty friend.

I've added embellishments to suggest a basket e.g. a sticker "handle" and basket weave embossing pattern, but you could decorate the card base in any number of ways to suit the recipient and occasion.

Friday, 3 April 2015

STEPPER CARD WITH CALENDAR

STEPPER CARD CALENDAR
This is an example of Regal's newest stepper card - this one had the largest panel in the middle rather than at the side, but its still large enough to take a small Regal calendar (CAP1).

I've used Kaiser papers to make a bit of bunting and add a little decoration, but clearly there are lots of other design options and I'll be showing a few on the blog over the next couple of weeks.  The main point is that all the hard work measuring, cutting and folding is already done - all you need to do is decorate!

Although this example has this year's calendar on it, we do already have the small and medium 2016 calendar pads on line and in the shop for those folks who like to get a really early start!!!

Friday, 27 March 2015

TWO CARDS FOR EASTER

EASTER BUNNY CARD
Sharon and Maz have been having fun making these cute Easter cards, using Regal card bases, some hole punched and cutr shapes and a bit of  imagination.  Notice, for instance how the bunny's nose is made from an upside down heart.

Don't be afraid to draw in details such as facial features, and use materials creatively - the bunny's basket, for example is a piece of trimmed burlap ribbon.

Raid the craft supplies for embellishments - paper flowers, rhinestones, buttons, twine etc.  Most of all have fun!!
EASTER CHICKEN CARD

Friday, 20 March 2015

SCALLOP EDGE BIRTHDAY CARD WITH FLOWERS

SCALLOP EDGE CARD WITH BIRD AND FLOWER
Janet has combined papers from Kaiser's Chanteuse collection, with Regal's scallop-edge cards (SCE1) to make this beautiful card.   Janet has used a white base, but the cards are also available in ivory.

Subtle inking enhances the various elements, and embellishments - small rhinestones and paper flowers have been carefully placed to enhance the printed design.

Its a little hard to see in the picture, but Janet has coloured a greeting sticker with a permanant marker that matches the pinks of the paper and attached it to a pale green background.  More decorative paper adorns the middle of the card.

This would be a lovely design for a special birthday or even a wedding.

Friday, 13 March 2015

SWEET BIRTHDAY CARD

HAVE A SWEET BIRTHDAY
How cute is this cheerful card that Tania made, using Regal's XSQS2 lime green card as a base.
She's added a punched border, matted pictures fussy cut from Kaiser papers, and a greeting made with black alphabet stickers.

I often forget that when just the right greeting sticker is not available that alphabet's are always at hand.  You can even use permanent markers to colour them however you want!

Friday, 6 March 2015

SUPER QUICK NOTE CARD

SUPER QUICK NOTE CARD
Lynne made this true 5 minute card from one of Regal's black single fold cards and some scrapbooking paper from Graphic 45.

Just because its a quick card, though, doesn't mean that good design goes astray, and the way Lynne has arranged the elements in the 1/3 - 2/3 ratio means that this card really works.

It could be used for many occasions, including as a notecard - just to drop a quick line to a friend for no particular occasion (email's great but you can't sit them on a shelf).  If you wanted to make a set of cards as a gift, a simple design such as this would be perfect.

Friday, 27 February 2015

THREE TECHNIQUES IN ONE CARD

GOOD IDEAS CARD
This card shows three techniques you might want to try, even if you chose not to make this actual card.  The first is applying glitter to the back of acetate circles (with clear glue) and then using the circles upside down - this looks better than the photo shows.  It keeps the glitter where its supposed to be, and also provides a smooth surface for stamping or (as in this case) for stickers.

The second idea is to use thin double sided tape with (heated) embossing powder to make gold borders (as shown either side of the orange strip).  Not all tapes are suitable, but the 3mm one sold by Regal Craft Cards will do the trick nicely.  You can, of course, use any embossing powder so you can have a nice selection of colours at hand.

And.....last but not least, and following on from Janene's card last week, sometimes instead of stacking shapes up for matting, why not cut a shape out as a frame, as shown here by the cut out circle to frame the double heart sticker.